Public Discussion Forum

My Tecma toilet controllers (2 separate toilets) periodically and independently began needing a breaker reset to flush.

Toilets both ‘operate’ properly, holding tank is empty, green light on each panel, each fill/flush/ macerate…

HOWEVER, over the past months, neither work unless I reset their breaker.

Breaker reset… fill button works but then not the flush button.

Breaker Reset… flushes & macerates on power-up.

Spent an hour with support but Tecma (then Thetford) has apparently merged with a company named DAVE CARTER with no employees or frontline support for Tecma Marine Toilets anymore.

The help I did receive seems pretty confident the all-in-one controllers have finally failed.

HELP !?

- Does anyone have insight, 24v controller replacement part #’s and/or sources ?

Hi Steve

I too had problems with my Tecma controller. Mine is the single push (fill and flush) versus the two button versions.

Agree - Tecma used to provide great support until the merger - no it's zip. The folks at Marine Sanitation are awesome and will be able to assist. My replacement was p/n: 36082 with a description of T-PF.P11B.

After replacing my old switch, I soon started to experience the same problem you have described. I tried to contact Tecma for help - no help although we did discuss warranty on the switch. I now carry a spare and am considering swapping out the replacement (2 years ago) with another new one.

Geary Long

M/Y Raven